เครื่องมือตั้งแนวสายพาน รุ่น TKBA 40
เครื่องจักรที่ขับเคลื่อนด้วยสายพานจำเป็นต้องมีการตั้งแนวอย่างแม่นยำ เพื่อช่วย ยืดอายุการใช้งานของสายพานและพู่เล่ย์ รวมถึงช่วยลดการสั่นสะเทือนของเครื่องจักรและลดต้นทุนพลังงาน
เครื่องมือตั้งแนวสายพาน TKBA 40 จาก SKF เป็นอุปกรณ์ที่ช่วยให้การตั้งแนวพู่เล่ย์สายพาน V-belt ทำได้อย่างง่ายและแม่นยำ โดยอุปกรณ์สามารถตรวจสอบและแก้ไขการเยื้องศูนย์ได้ทั้ง
- การเอียงในแนวตั้ง (Vertical misalignment)
- การเอียงในแนวนอน (Horizontal misalignment)
- การเยื้องศูนย์แบบขนาน (Parallel misalignment)
ตัวเครื่องประกอบด้วย
- ตัวส่งสัญญาณเลเซอร์
- ตัวรับสัญญาณเลเซอร์
พร้อม แม่เหล็กกำลังสูงและตัวนำร่องแบบ V-Guide ที่ออกแบบมาให้พอดีกับร่องของพู่เล่ย์ ทำให้สามารถติดตั้งอุปกรณ์เข้ากับพู่เล่ย์ได้อย่างรวดเร็วและสะดวก
ขอใบเสนอราคา :
จุดเด่นของสินค้า (Benefits)
- ติดตั้งได้รวดเร็วด้วย แม่เหล็กกำลังสูง
- ขั้นตอนการตั้งแนวใช้งานง่าย ไม่ซับซ้อน
- รองรับการตั้งแนวพู่เล่ย์ V-belt ได้หลากหลายขนาด โดยมี V-Guide ให้เลือก 4 ขนาด
- สามารถปรับ ความตึงสายพานและแนวสายพานได้พร้อมกัน
- ตั้งแนวโดยอ้างอิงจาก ร่องของพู่เล่ย์ (Grooves) แทนการอ้างอิงจากหน้าพู่เล่ย์ ทำให้สามารถตั้งแนวพู่เล่ย์ที่มีความกว้างแตกต่างกันได้อย่างแม่นยำ
ทำไมต้องซื้อกับ บริษัท ไทยภาสิทธิ์ จำกัด ?
- ตัวแทนจำหน่ายสินค้า SKF อย่างเป็นทางการ
- ประสบการณ์มากกว่า 33 ปีในวงการอุตสาหกรรม
- สต็อกสินค้าพร้อมส่ง มากกว่า 8,000 รายการ
- บริการให้คำปรึกษาโดยผู้เชี่ยวชาญ
- บริการครบวงจรสำหรับลูกค้าอุตสาหกรรม
- ให้คำแนะนำด้านเทคนิค พร้อมสาธิตการใช้งานสินค้า
| Technical data | TKBA 11 | TKBA 21 | TKBA 31 | TKBA 40 |
|---|---|---|---|---|
| Designation | TKBA 11 | TKBA 21 | TKBA 31 | TKBA 40 |
| Transmitter/emitter unit | ||||
| Type of laser | Red laser diode | Red laser diode | Green laser diode | Red laser diode |
| Laser | 1 × Built-in class 2 laser, <1mW, 635nm | 1 × Built-in class 2 laser, <1mW, 635nm | 1x Built-in class 2 laser, <1mW, 520nm | 1 × Built-in class 2 laser, <1 mW, 632 nm |
| Laser line length | 2.4 m at 2 m (7.9 ft at 6.6 ft) | 3 m at 2 m (9.8 ft at 6.6 ft) | ||
| Measurement accuracy | ||||
| - Angular | Better than 0.02° at 2 m (6.6 ft) | Better than 0.2° | ||
| - Offset | Better than 0.5 mm (1/50" in.) | Better than 0.5 mm (0.02 in.) | ||
| Measurement distance | 50 to 3 m (2 to 10 ft) | 51 to 3 m (2 to 10 ft) | 50 to 6 m (2 to 20 ft) | 51 to 6 m (2 to 20 ft) |
| Control | Laser ON/OFF | Laser on/off switch | ||
| Housing material | ABS + 2K and Aluminium base powder coat finish | Extruded aluminium | ||
| Receiver unit | ||||
| Housing material | Passive targets: ABS | Same as transmitter unit Passive targets: ABS | Aluminium | |
| Fixtures | ||||
| Mounting | Magnetic, side mounted | Magnetic, groove mounted (optional side adapter TMEB A2) | ||
| V-guides | N/A | Size 1: 22 mm, short rods (3× pairs) Size 2: 22 mm, long rods (3× pairs) Size 3: 40 mm, short rods (3× pairs) Size 4: 40 mm, long rods (3× pairs) | ||
| Battery | 3 x AAA Alkaline type IEC LR03 | 2× AAA Alkaline type IEC LR03 | ||
| Operation time | 32 hours (continuous operation) | 6 hours (continuous operation) | 20 hours (continuous operation) | |
| Operating requirements | ||||
| Operating temperature | 0 to 40 °C (32 to 104 °F) | |||
| Storage temperature | - 20 to 60 °C (-4 to 140 °F) | -20 to +65 °C (-4 to +150 °F) | ||
| Relative humidity | 10 to 90% RH non-condensing | |||
| IP rating | IP 40 | |||
| Calibration certificate | - | Valid for two years | ||
| Dimensions | ||||
| Transmitter/emitter unit | 98 x 97 x 52 mm (3.86 x 3.82 x 2.05 in.) | 70 × 74 × 61 mm (2.8 × 2.9 × 2.4 in.) | ||
| Receiver unit | Passive targets: 40 x 25 mm (1.57 x 0.98 in.) | Same as transmitter unit Same as transmitter unit Passive targets: 40 x 25 mm (1.57 x 0.98 in.) | 96 × 74 × 61 mm (3.8 × 2.9 × 2.4 in.) | |
| Carrying case dimensions | 260 × 85 × 180 mm (10.2 × 3.3 × 7.1 in.) | 360 x 110 x 260 mm (14.2 x 4.3 x 10.2 in.) | 260 × 85 × 180 mm (10.2 × 3.4 × 7.0 in.) | |
| Weight | ||||
| Transmitter/emitter unit | 250 g (0.55 lb) with batteries | 320 g (0.7 lb) | ||
| Receiver unit | 35 g (0.08 lb) 3 pcs passive targets | Same as transmitter unit | 270 g (0.6 lb) | |
| Total (incl. case) | 0.84 kg (1.85 lb) | 1.62 kg (3.57 lb) | 1.88 kg (4.14 lb) | 1.2 kg (2.7 lb) |
| Case contents | 1 x TKBA 11 transmitter unit 3 x TKBA TARGET passive targets 3 x AAA batteries 1 x Printed Instructions for use | 2 x TKBA 21 transmitter / receiver unit 6 x AAA batteries 1 x Printed Instructions for use | 2 x TKBA 31 transmitter/ receiver unit 3 x TKBA TARGET passive targets 6 x AAA batteries 3 x Belt tension checkers of different loads 1 x Pulley groove profile checker 1 x Printed Instructions for use | 1 x TKBA 40 transmitter unit 1 x TKBA 40 receiver unit 2 x AA batteries 4 x sizes of V-guides, 3 × of each size 1 x Printed Instructions for use 1 x Calibration certificate |
